Sliding Barn Door Hardware Kit Top Mounted Hanger Track Black Steel Closet Door Roller Rail Single Door Sliding Door Rail Pulley Rail Wheel
PLS NOTE :Random Product Design Style
Please make sure your wall is strong enough to hang heave door panel before buying.
Sliding Rollers: Quality bearing steel keep the wheels run smoothly in track.
Wide Use: ideal for kitchen, storage room, bedroom, closet, warehouse, cloakroom, wine cellar, etc.Which can match with different styles and different colors of doors for the simple and artistic style.
Due to the simple design of the slide, no installation experience is needed, just follow the simple installation instructions.
Choose Door Width and Sliding Roller
1) Confirm Door Width
Single Door: Door Width=Door Opening Width+100mm
Double Door: Door Width=(Door Opening Width+100mm)/2
Single door opening width 800mm, door width at least needs to be 900mm
Double door opening width 1500mm, door width at least needs to be 800mm
Notice: Please note 100mm is the least to add.
2) Confirm Length of Sliding Rail
Single Door: Sliding Rail Length > Door Width*2
Double Door: Sliding Rail Length > Door Width*4
The clearance from the top of the door to the ceiling is about 6";
The clearance between door panel and wall is about 5/8" if take 1 3/5" thick door for example;
Easy to Install:Step-by-step instructions
1. Measure the Wall and Drill Holes
Different sliding rail sizes require different measurements and hole quantites, please measure first and use a pencil mark on the wall.
Then you can drill holes as suggested. Please note percussion bit size for wooden door is Φ5mm and concrete wall is Φ10mm.
2. Install Anchoring Screws (Concrete Wall)
NOTE！Wooden Wall: Use the hammer to punch the screw in, then use the wrench to twist the screw until it is fixed.
3. Install Sliding Rail
4. Install the Sliding Roller
Find the sliding roller you have first, measure size and draw lines as below pictures.
Mark the place where you need to drill the holes.
Then drill holes accordingly and fix the screws to finish the installation of sliding roller.
5. Install Anti-Jump Disk
(1) Put the anti-jump disk to the edge of the door and fix it first
(2) Then spin it to the center of the door and screw the disk
6. Install Floor Guide and Adjust Door Stops
Position: 25mm from the wall to the center line of the floor guide holes. Distance between the wall and inside holes is 24mm.
Measurements: Two holes, distance 24mm, use a Φ6mm bit, hole depth 30mm.
7. Tools Needed
Features:Push-pull opening and closing way saves lots of space which is quite suitable for modern decoration style.
Type: Sliding Door Rail Pulley
Material: Carbon Steel
Size: 30cm x 8cm x 8cm/11.8" x 3.15" x 3.15" (Approx.)
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
PLS NOTE: ONLY the hardware kit is for sale, door panel is not included. This hardware kit is for single door.
PLS NOTE :Random Product Style
2 x Sliding Door Rail Pulley
4 x Screw
(No includes other spares)